Cooler MasterNR200 Mini-ITX PC Case, 330mm Horizontal Triple-Slot Mount GPU, 240mm|280mm AIO, SFX PSU 130mm, Compatible RX 7900 XTX|4080 Super, Vented Panels, DIY
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7Thumbnail 8Thumbnail 9Thumbnail 10Thumbnail 11Thumbnail 12Thumbnail 13Thumbnail 14Thumbnail 15Thumbnail 16

Cooler MasterNR200 Mini-ITX PC Case, 330mm Horizontal Triple-Slot Mount GPU, 240mm|280mm AIO, SFX PSU 130mm, Compatible RX 7900 XTX|4080 Super, Vented Panels, DIY

4.7/5
Product ID: 214391288
Secure Transaction

Details

  • Brand
    Cooler Master
  • Motherboard Compatability
    Mini-ITX/DTX
  • Case Type
    Mini-Tower
  • Recommended Uses For Product
    Gaming
  • Color
    Black
  • Material
    Steel Plastic
Compact SFX PSU up to 130mm
❄️240/280mm liquid cooling ready
🖥️330mm triple-slot GPU support

Description

🔥 Compact power, epic performance — build the rig everyone envies! 🖤

  • TRIPLE SLOT GPU READY - Accommodates GPUs up to 330mm, including RTX 4080 Super and RX 7900 XTX for next-level graphics.
  • OPTIMIZED AIRFLOW DESIGN - Vented steel panels and support for up to 6 fans ensure your components stay chill and efficient.
  • SLEEK MINI ITX POWERHOUSE - Maximize performance in a compact 18.25L footprint designed for Mini-ITX builds.
  • SPACE SAVVY PSU COMPATIBILITY - Supports compact SFX PSUs up to 130mm, perfect for clean, powerful builds without bulk.
  • ADVANCED LIQUID COOLING SUPPORT - Side-mounted 240mm/280mm AIO compatibility keeps your rig cool under heavy workloads.

The Cooler Master NR200 Mini-ITX case delivers a compact yet versatile platform supporting high-end triple-slot GPUs up to 330mm, advanced liquid cooling with 240/280mm AIO compatibility, and efficient airflow through vented steel panels. Designed for Mini-ITX motherboards and compact SFX PSUs up to 130mm, it’s the ultimate choice for professionals craving powerful, space-saving PC builds.

Large manufacture image 1
Small manufacture image 1Small manufacture image 2Small manufacture image 3Small manufacture image 4Small manufacture image 5Small manufacture image 6Small manufacture image 7Small manufacture image 8Small manufacture image 9Small manufacture image 10

Specifications

Number of USB 2.0 Ports2
Number of USB 3.0 Ports2
BrandCooler Master
SeriesNR200 Black
Item model numberMCB-NR200-KNNN-S00
Item Weight10.56 pounds
Product Dimensions14.76 x 7.28 x 11.49 inches
Item Dimensions LxWxH14.76 x 7.28 x 11.49 inches
ColorBlack
ManufacturerCooler Master
ASINB08BFJ8V8C
Country of OriginChina
Is Discontinued By ManufacturerNo
Date First AvailableJune 17, 2020

Have a Question? See What Others Asked

Will the vented panel be sold separately as an accessory?
How many 2.5” drives will this hold?
Will the glass panel fit on the nr200? are there any differences between the nr200p and the nr200 besides the nr200p shipping with the glass panel?
Can this fit two 2.5" ssd and two 3.5 hdd" at the same time?

Reviews

4.7

All from verified purchases

J**R

MIX AND MATCH FUN!

the white and black NCORE 100 Air cases have 100% interchangeable parts so you can switch out the shells and get a black and white or silver and black versions if you buy both (see pictures)here are some other facts not mentioned by others1. FANS: comes with 2x 120mm fans, the case only has room for 2X 120mm fans (not including cpu, and PSU fan) 1x on top and the other on side. note the cooler master fans are a joke barely moving any air, you'll get better cooling buying something better. im using 2x 2008 thermaltake 2600rpm fans that still work to this daythis air version is different than the water cooled version which was 4 inches taller for the radiator on top. this air version has 0.0 room for a water cooler with a radiator, the top has a mount to only fit 1x 120 mm fan. if you want water cooling you need to buy the water cooled version.2. 2.5 SSD MOUNT: you can mount an 2.5 SSD drive at the bottom of the case using 4x screw pegs held by the friction of rubber holes. to my disappointment you can only mount 1x2.5 drive in the case. adding the MOBO i saw plenty of room to stack 2x 2.5 ssd drives so im disappointed they didn't include a rack. since 2015 ive accumulated 15x 2.5 ssd drives and there just sitting on the shelf why not use them to store old less intensive games, movies, music photos and so oni have pictures on how to mount 2x2.5 ssd drives at the bottom you will need to buy something like"2.5inch Solid State Hard Disk SSD Aluminium Alloy Bracket ITX Computer case Built-in PC SSD HDD Bracket 2 Bays SATA PATA Computer Hard Disk Rack Docking Station Base" by MerainMelisted on amazon, note my pictures you only have space on one side to use the bracket the bracket won't fit on the side facing the panel but 1x side is strong enough to support both drives, be sure to screw in the bracket first then the bottom pegs note on the side of the bracket the bottom pegs won't go in fully cause they share the same hole but its enough to have a gripAIR COOLER: also the 70mm air cooler claim clearance is completely wrong, the manual says maximum is 68mm but i installed a 67mm cooler with the fan and i couldn't fit a hair between the closing panel and cooler, so the real clearance is around 67.5mm or lower. this is due to CM adding a plastic shroud in the panel that reduces cooler space even if by 0.2-0.3 mm especially if your slim fan has rubber feet that adds more length a detail fan sellers never include.ADJUSTMENTS: just like the water cooled version you can expand the cases width about an inch and move the inner tray to add more cpu air cooler space or more space for the graphics card, either one or the other.note: i maxed the CPU air cooler space to 67mm cause I'm using a hand me down 12900ks and it needs as much heat sink as possible, with this set up i can add a 3x slot graphics card just barely but if you have something like a 3.2 or 3.5 slot GPU with fan overhang it wont fitworking inside the case is quite good due to the fact you can get your hands in any direction of the caseNOTE: in order to change out the side fan you have to remove the bracket that allows you to adjust the width of the case, so if your going to adjust the size of the case and need to switch out the fans do it while your adjusting the case size.fantastic value right now only $140 lets me build 2 mini pcs, but you do have to buy your own SFX PSU this case does not come with unlike the water cooled version

J**E

Comes with 2 fans and all the panels pop off

This case is honestly a steal even at $75+. It has great ventilation and it all pops apart for easy building. It comes with 2 fans and tooless mounts for ssds and the 2 fans. Also includes 1 3 way fan splitter.

N**H

I'm very impressed

I have nothing bad to say about this case. It's simply flawless. I've had all sorts of cases over the years, but none has been as fun to build in or as well designed as the NR200.It's things like two velco straps for the PSU shroud to hold wires up and away from the GPU, including fan grills to keep wires away from fan blades, or the ingenious side-mount for AIO radiators that make this case so great.

L**N

My Favorite ITX Case - Streaming PC Upgrade

I have no regrets purchasing the case—I love how it turned out. What I really appreciate about the NCORE 100 is its compact footprint, sleek tower shape, and elegant metallic finish.Cable management does require a bit of creativity to keep things looking tidy, but the case includes plenty of zip ties and has more than enough space to route your cables efficiently. The build quality feels solid, and the overall design is both modern and refined.It also comes with two exhaust fans pre-installed, so there’s no need to buy additional cooling right out of the box.

J**N

Buy the newer model.

It is a nice case. The problems that I have with it were corrected in later versions, so just buy the newer model instead.

N**A

Be patient when building. Perfect POWERHOUSE itx with amazing cooling potential!

The media could not be loaded. Wow! What a beautiful case! If your looking for an itx case that's small and can fit a powerhouse gou and cou aio, look NO FURTHER! I have a 4090 with a 7950x3d being cooled by a 280 AIO and a 1000w power supply. I took these pictures shortly after building this PC so its pretty messy with cables everywhere but it will provide a clean look to my setup once I organize everything. I'll give it a 8/9 out of 10 as far as how easy it was to build in this case. You need patients and make sure your aio pump will fit as things may be tight if your planning for a similar build. Overall it's an AMAZING case with amazing cooling.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Sneha T.

Received my product in pristine condition. Great service overall.

1 month ago

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
R5029

Duties & taxes incl.

South Africastore
1
Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Cooler Masternr200 Mini Itx Pc Case 330mm Horizontal Triple Slot | Desertcart South Africa