KICKER46KISLOC2 K-Series Stereo Line-Output Converter w/Remote Turn-On Output

Great option for radios missing a subwoofer output. In this case my radio did have a subwoofer output but the gain on it was really weak, causing my sub to be very quiet.This saved my day, didn't need the 12 volt output, just connected the four speaker wires and the ground. Excellent volume

The Kicker 46KISLOC2 K-Series Stereo Line-Output Converter is a fantastic tool for upgrading your car audio system. It delivers clean, high-quality sound without distortion and makes it easier to integrate aftermarket amplifiers with factory stereos. Its remote turn-on feature, simple installation, and durable design make it an excellent choice for both beginners and experienced car audio enthusiasts. If you’re looking for an affordable and reliable line-output converter, the Kicker 46KISLOC2 is definitely worth considering.

There’s not much to say besides it delivered a clean sound to my amp. Installed this in a 2011 Toyota Sienna so you could only imagine how much room I have for subs. ;)

I would recommend this product and easy to install.

Works, BUT....I have some experience with installing aftermarket subs. That being said, here's some information to consider with this LOC:As opposed to the LOC, the LOC2 has a remote turn on wire. Depending on how you are hooking this up, it can cause a "constant on" issue with the accessory that you are piggy backing off of in the fuse block. This is apparently an issue affected by some modern cars and the way the electrical system works (e.g. power in the speaker wires, if tapping into them for your audio signal).Specific example: I added a sub in a 2024 Subaru. I tapped into the ACC fuse spot using an ADD-A-FUSE connector. After doing this, the stereo and amp would stay on, unless I removed the ADD-A-FUSE. Apparently, the powered LOC2 closed the loop on the ACC causing it mm to stay powered.The fix: I disconnected the blue & ground (black) wires and simply hooked the remote wire from the fuse block straight to the amplifier the traditional way. Problem solved.My take in this situation was that I would have been better served just buying a traditional LOC for my specific application, like, perhaps, the original Kicker LOC (46KISLOC) I, personally wanted to avoid using any other brands that are manually adjustable.NOTE: This was MY experience. Those more experienced than me may have a better solution.

great product and simple to install... i used it for my factory stereo feeding a subwoofer...

This is perfect for when you need it! Clean sound and works great. And easy to install!!

Don't know if I got a bad product, I would assume so because the brand is a trusted brand, one I have used many times and this item seems to have lots of good reviews. Hooked up to a kicker Bassstation 10" sub box with built in amp. Ran all new cables, sub would not fire. I verified power, ground, and rca cable resistance, all under 0.3 ohms, so we'll within spec. Light illuminated, on rca adapter and sub enclosure, but zero output from sub itself. Wired my sub directly to rear speakers for signal impulse, and the sub fired as it should. Verified output on rca cables just to be sure, and signal was good. I did not want to splice into my speaker wires in my truck, which is why I purchased the rca converter box. However, it did not convert the signal, zero output on speaker wires with verified input. Damaged or bad product from factory. I would return it, but I threw it away out of frustration. Still no hate for the brand, will continue to use their products, however, this item was not QA'd appropriately, as it did not function as designed. Still left 3 stars because shipping was fast, and again, this company has never let me down before this situation. Hopefully no one else has the same issues, and if they do, hopefully they don't throw out the item so they can get a refund, haha.